Description
CR7910 adhesive backed Mylar PVC cards are ideal for printing on most direct-to-card printers. Mylar backing offers greater thickness for easier feeding. CR7910 adhesive back PVC cards are typically applied to proximity/technology cards.
Adhesive-backed CR79 cards are slightly smaller dimensionally than the standard CR80, measuring 3.303” x 2.051”. CR79 10 mil cards are made to fit into the inside edge of a proximity card.
CR79 10 mil Mylar adhesive back cards are also known as:
- CR7910
- CR79.010
- 79.010-MYAB
Packaged in five shrink-wrapped packs of 100, for a total of 500 blank ID cards, CR7910MYAB cards are vision-inspected to ensure quality.
Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.
Remember: If you’re placing these cards on pre-slotted access control cards, you will need a slot punch to render a hole in the adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid damage to your printhead. See our Slot Punches section for options.
Note: Card thickness is 20 mil before removal of 10 mil adhesive back. 20 mil cards may not feed into every card printer. Please check your card printer specifications.
Specifications:
Box of 500 CR79 10 mil white adhesive-backed graphic-quality PVC cards with a Mylar backing.
- White
- Mylar adhesive-backed for easy feeding
- Superior/graphic quality cards
- 500 cards (packaged in 5 packs of 100)
- 100% PVC
- CR79 size
- 3.303″ x 2.051″ (83.9 mm x 51 mm)
- 0.10 mil thickness*
- Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.
*Card thickness is approximately 0.20 mil before removal of the 0.10 mil adhesive back. It may not feed/work in every dye-sub card printer. Please check your card printer specifications.
Note: Part number CR7910MYAB corresponds with the following vendor part numbers:
- Fargo – 82279
Reviews
There are no reviews yet.