Description
CR8010 Mylar adhesive-backed PVC cards are ideal for printing on most direct-to-card printers. The Mylar backing offers greater thickness than paper backing for easier feeding. Adhesive backed PVC cards are typically applied to proximity/technology cards.
These cards are CR80 size, which is the standard, most commonly used plastic card size, measuring 3.375” x 2.125”, the same dimensions as a credit card. CR80 10 mil Mylar adhesive back PVC cards are also known as:
- CR8010
- CR80.010
- 80.010-ADH-MYLA
These Mylar adhesive back CR80 PVC cards are 10 mil thick and are packaged in five shrink-wrapped packs of 100, for a total of 500 blank ID cads, and are vision inspected to ensure quality.
Remember: If you’re placing these cards on pre-slotted access control cards, you will need a slot punch to render a hole in the Mylar adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid damage to your printhead. See our Slot Punches section for options.
Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.
Note: 10 mil cards may not feed into every card printer. Please check your card printer specifications.
Specifications:
Box of 500 CR80 10 mil white adhesive-backed graphic-quality PVC cards with a mylar backing.
- White
- Superior/graphic quality cards
- 500 cards (packaged in 5 packs of 100)
- 100% PVC
- CR80 – standard credit card size
- 3.375″ x 2.125″ (85.6 mm x 54 mm)
- 0.10 mil thickness*
- Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.
*Card thickness is approximately 0.25 mil before removal of 0.15 mil adhesive back. May not feed/work in every dye-sub card printer. Please check your card printer specifications.
Note: Part number CR8010MYAB corresponds with the following vendor part numbers:
- Fargo – 82267
- Zebra – 104523-010
Reviews
There are no reviews yet.